Sitrex TR Hay Rakes - efficient and effective

Posted by Cooper Walton in Hay & Silage Rakes
  May 5, 2020 3:15:40 PM

The Sitrex TR9 Side Rake is an excellent choice for the discerning farmer or small contractor looking to get into their own raking. At around 2/3 the cost of a V rake of similar working width, it makes a lot of sense financially, especially if deep/thick windrows are not required. For example if the baler to be used does not have the capacity to pick up a thick windrow (such as those left by a V rake) the side rake is able to be adjusted to pick up almost any width of material and thus create the desired thickness of windrow relative to the capacity of baler to be used.



1 Comment


A Universal Power Rake for All

Posted by Cooper Walton in Hay and silage, Hay & Silage Rakes
  Jan 24, 2020 11:08:30 AM

Do you have the right gear for the job?

The Hay Maker 300 (HM300) is the ultimate machine for spreading, tedding and windrowing hay and silage crops.



0 Comments


Getting the best cut

Posted by Cooper Walton in Mowing
  Aug 27, 2019 4:04:39 PM

The successful finishing of a lawn is ordinarily no easy task. Thanks to the Sitrex SM mowers it has been made much easier through excellent design and innovation as well as the use of higher quality materials.

Cutting correctly involves carefully selecting the correct height at which to cut the grass, ensuring the cutting blades on the mower are as sharp as possible.



0 Comments


UNI400 proves to be the ideal tedder/rake for straw!

Posted by Sam Searle in Hay & Silage Rakes
  Feb 28, 2019 3:32:25 PM

Over the last decade many cropping farmers have made the switch from burning their once worthless straw to baling it for feed as demand for a 'bulk filler' from surrounding dairy farms has increased. Being able to make a few extra dollars each season without growing extra crops was always going to be a big plus, read on to see how the Sitrex UNI400 makes this process as efficient as possible.



0 Comments


UNI400 Tedder/ Rake ticks all the boxes

Posted by Sam Searle in Hay and silage
  Jan 22, 2019 3:49:35 PM

When Kevin Manson was looking for a new tedder, the UNI400 ticked all the boxes of what he was looking for.

The UNI400 has helped to make his rural contracting operation more efficient by using one machine for Tedding and Raking, which allows one man to do the entire job! Listen to what Kevin has to say below about his machine that will do it all, Tedding and Raking in one.



0 Comments


The 'Q Rake' has landed!

Posted by Sam Searle in Insider, Hay & Silage Rakes
  Dec 19, 2018 3:15:07 PM

Over the 2018/2019 forage harvest season Sitrex added another rake to its range here in New Zealand!

The QR10 V-rake is specifically designed for farmers and smaller contractors who need a reliable V rake that's simple and easy to use but still get the job done... Read on for more information.



0 Comments


What is the right rake for your hay and silage making?

Posted by Sam Searle in Hay and silage
  Oct 19, 2018 2:51:09 PM

Using the right machinery is essential on today’s farms - profitability isn’t only about how much you can produce, but how efficiently you can produce it. When it comes to hay and silage making, the inefficiencies that come from using the wrong rake make for a constant drain on a farm’s bottom line.



0 Comments


How to get the best results from your hay and silage making

Posted by Sam Searle in Hay and silage
  Oct 19, 2018 2:51:01 PM

 

Getting the basics right for hay and silage making will boost your farm’s forage harvesting productivity and efficiency, and in turn, boost your operation’s bottom line. Get it wrong and risk the loss of potential quality forage.



0 Comments


3 forage harvesting tips that increase farm profitability

Posted by Sam Searle in Hay and silage
  Sep 24, 2018 11:46:33 AM

Farm for profit, not necessarily higher production – that’s been the recipe for success for generations of New Zealand farmers. It’s not always about how much you produce (whilst producing more is generally ideal), it’s about the gap between production costs per unit and the price your paid per unit. That’s your profit.



0 Comments


Cut At The Right Time To Get More Out Of Your Hay

Posted by Sam Searle in Making Hay tips, Hay and silage, Silage making tips
  May 31, 2018 11:06:19 AM

It's all in the timing!

The best time to cut grass for hay is when the leaves are fully developed but just before the seed heads appear, this is the stage at which you will be able to make the most nutritous hay for your stock.

  • Cutting the hay too early will result in lower yields.


0 Comments